Everything below concerns Residual moisture. We keep the language plain, cite what the science says, and separate well-supported claims from open questions.
Last reviewed on 2026-03-16. Where a claim depends on a specific study, the study is described rather than over-claimed.
Stability studies examine how temperature, humidity, and time influence a lyophilized product. Accelerated conditions provide early information about degradation pathways, while long-term studies support shelf-life claims. The glass transition temperature of the dried formulation can indicate its physical stability, and storage above this temperature may increase molecular mobility and lead to collapse or aggregation. Container closure integrity also matters because moisture or oxygen ingress can degrade the product, so vial stoppers and seals are part of the quality system.
Handling and storage practices aim to keep the cake intact and dry. Vials are typically stored upright at controlled temperatures, often between 2 °C and 8 °C or at -20 °C for longer-term use. Reconstitution involves adding a suitable diluent and gently mixing until the solid dissolves. Shaking or rapid injection of diluent can create foam or damage sensitive molecules. Once reconstituted, the product may require refrigeration and use within a defined period.
Residual moisture is a key quality attribute for lyophilized products. Water that remains after secondary drying can affect chemical stability, cake structure, and shelf life. Karl Fischer titration is a common method for measuring water content in the dried solid. The target range varies by product, but many biologics are dried to between 0.5% and 3% water by weight. Acceptable limits are set during development and confirmed by stability studies.
Lyophilization, also called freeze-drying, removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts free water into ice and may also produce a glassy phase. Primary drying then lowers chamber pressure so ice sublimes directly to vapor without passing through a liquid stage. Secondary drying raises the temperature modestly to remove bound water. The result is a porous, dry solid that usually reconstitutes quickly. Each stage influences pore structure, residual moisture, and stability.
The physics of lyophilization depends on phase boundaries and heat and mass transfer. During primary drying, heat supplied to the product must equal the latent heat of sublimation, while water vapor moves through the drying cake to the condenser. If shelf temperature or pressure is set too high, the ice front can exceed the collapse temperature, causing meltback or pore collapse. If conditions are too cold, drying slows and costs rise. Formulation excipients, vial geometry, and freezing rate alter these limits.
Equipment for lyophilization includes a vacuum chamber, temperature-controlled shelves, a condenser, and a vacuum pump. A refrigeration system cools the shelves and condenser below the product's freezing point. Process monitoring often uses Pirani and capacitance manometers, thermocouples, and resistance sensors. Cycle development balances product quality with time and energy use. Some products are annealed during freezing to improve crystallization of bulking agents. Open questions remain about scaling cycles between laboratory, pilot, and production freeze-dryers.
| Property | Value | Notes |
|---|---|---|
| Residual moisture | 0.5-3% w/w | Typical range for many biopharmaceuticals |
| Typical storage temperature | 2-8 °C | Some products require -20 °C or lower |
| Reconstitution time | Seconds to several minutes | Depends on cake porosity and diluent |
| Common moisture method | Karl Fischer titration | Measures water content in the solid |
| Container closure | Stoppered vial with seal | Protects against moisture and oxygen ingress |
Quality control for lyophilized materials includes visual inspection, residual moisture measurement, and reconstitution testing. Cake appearance can reveal process problems such as collapse, shrinkage, or meltback, although appearance alone does not prove potency. Residual moisture is commonly measured by Karl Fischer titration or by loss on drying. Reconstitution time is checked because a slow or incomplete dissolve can indicate a change in pore structure. Stability studies track these attributes over time under defined temperature and humidity conditions.
Analytical methods for lyophilized solids must account for the low moisture content and the fragile cake. Karl Fischer titration is widely used for water content, while near-infrared spectroscopy can measure moisture non-destructively in sealed containers. X-ray diffraction and modulated differential scanning calorimetry help identify crystalline or amorphous phases. Residual solvent analysis may be needed if organic solvents were used during formulation. The combination of these methods supports batch release and long-term stability assessment.
Lyophilized products are typically stored as sealed solids in vials or syringes. Moisture ingress is a major concern because many dried cakes are hygroscopic and can lose stability when exposed to humid air. Storage temperature depends on the formulation; some products are kept refrigerated, while others are stable at room temperature. Container closure integrity and headspace moisture are often monitored. Light protection may also be required for some photosensitive materials.
Freeze-drying is used for materials whose activity or structure depends on low temperature and low water content. Examples include certain biologics, diagnostic reagents, starter cultures, coffee, and porous inorganic precursors. The dried product forms a cake whose porosity aids rapid wetting and dissolution. Main drawbacks are high energy use, long cycle times, and sensitivity to formulation and equipment variation. Questions remain about how freezing rates and ice morphology affect batch uniformity, especially when moving from laboratory to production scale.
Lyophilization, also called freeze-drying, is a dehydration process in which a solvent, usually water, is frozen and then removed by sublimation under reduced pressure. The method preserves heat-sensitive materials that would degrade in conventional drying. Large-scale use grew during the mid-twentieth century for blood plasma and antibiotics, and it later expanded to vaccines, enzymes, foods, and advanced materials. The process produces a dry, porous solid that usually reconstitutes rapidly. It is distinct from simple evaporation because the solvent bypasses the liquid phase during primary removal.
The process generally proceeds in three stages: freezing, primary drying, and secondary drying. During freezing, controlled cooling converts water into ice and may also crystallize or vitrify solutes. In primary drying, the pressure is lowered below the triple point, and heat is supplied so ice sublimes directly to vapor. Secondary drying removes water that remains bound to the solid matrix, yielding a low final water content. Product temperature must stay below the collapse or glass transition temperature to maintain structure. Cycle design therefore balances shelf temperature, chamber pressure, and time.
Regulatory expectations for lyophilized products focus on consistent manufacture and documented stability. Batches are often monitored for moisture, appearance, potency, and sterility where applicable. Process parameters such as shelf temperature, chamber pressure, and drying time are recorded and controlled within validated ranges. Open questions remain about how best to predict long-term stability from short accelerated studies, especially for complex biologics. Variations in freezing rate and ice crystal size can produce differences that are not always visible but may affect performance.
After drying, a lyophilized product is usually sealed under vacuum or an inert gas to limit moisture uptake. Residual water content is measured because small changes can alter chemical stability and cake appearance. Storage temperature depends on the material; many biological products are kept at 2–8 °C, while some require −20 °C or colder. Exposure to ambient humidity during handling can cause the porous solid to absorb water and collapse. Container closures and stoppers are therefore selected for low moisture transmission and compatibility.
In February of 2025 the first case of CRISPR gene editing therapy on a child was documented. It was used to treat Severe Carbamoyl Phosphate Synthetase 1 Deficiency. It was administered At Children's Hospital of Philadelphia and is currently successful in its use to counteract the disease. "Advanced Gene Editing: CRISPR-Cas9" (PDF). Congressional Research Service. Archived from the original (PDF) on 5 December 2017. Retrieved 24 October 2017. "Jennifer Doudna talk: Genome Engineering with CRISPR-Cas9: Birth of a Breakthrough Technology". 10 September 2022. Archived from the original on 25 November 2016. Retrieved 24 November 2016. "Human Nature". NOVA. Season 47. Episode 9. 9 September 2020. PBS. WGBH. Retrieved 7 April 2023.
Alkaline lysis is often an initial step in molecular biology experiments, allowing specific DNA molecules to be extracted and purified so that it can subsequently be used in downstream applications. When performed properly, alkaline lysis yields pure DNA exclusively from bacterial plasmids. A plasmid is a small circular DNA molecule that is found naturally in certain cell types, most commonly bacterial cells, and replicates independently of the cell's chromosomal or genomic DNA. Plasmids can also be found less commonly in archaeal and eukaryotic cells. They often contain genetic information useful to the host cell, such as genes that confer antibiotic resistance or virulence factors. Plasmids are readily uptaken by bacterial cells from the environment and can be passed between cells by various forms of horizontal transmission such as transduction, transformation, and conjugation, as well as by vertical transmission from parent to offspring. Because of their versatility and relatively simple manipulation, plasmids are of interest to scientists and have become a standardized laboratory tool by which recombinant DNA is artificially introduced into cells and genomes. The basic process of alkaline lysis involves a series of steps which can be performed in the laboratory:
A schematic of the optical systems is shown in Figure 1. The variable UV-Vis absorbance detector's optical bench is showing how the flow cell is positioned after the optical system, including the monochromator, which typically has a physical slit and a moving grating, so it is illuminated by a selected wavelength, reaching a photo-diode. The bench of the diode array detector, however, is configured so that the flow cell is positioned before the optical parts, so that the beam containing the entire spectrum is passing through it. The optical parts consist also with a monochromator and a slit, but with a fixed grating, which disperses the light onto a diode array imaging element.
Sources: en.wikipedia.org
The following classification system for transmembrane solute transporters has been constructed in the TCDB. Three families of ABC exporters are defined by their evolutionary origins. ABC1 exporters evolved by intragenic triplication of a 2 TMS precursor (TMS = transmembrane segment. A "2 TMS" protein has 2 transmembrane segments) to give 6 TMS proteins. ABC2 exporters evolved by intragenic duplication of a 3 TMS precursor, and ABC3 exporters evolved from a 4 TMS precursor which duplicated either extragenicly to give two 4 TMS proteins, both required for transport function, or intragenicly to give 8 or 10 TMS proteins. The 10 TMS proteins appear to have two extra TMSs between the two 4 TMS repeat units. Most uptake systems (all except 3.A.1.21) are of the ABC2 type, divided into type I and type II by the way they handle nucleotides. A special subfamily of ABC2 importers called ECF use a separate subunit for substrate recognition. ABC1 (InterPro: IPR036640): ABC2 (InterPro: IPR000412 [partial]): ABC3 (InterPro: IPR003838):
The entries in BTO are updated bi-annually as part of the major update of BRENDA. It is available via the BRENDA website in the category “Ontology Explorer”. The enzyme source terms can be searched via the BTO query form. As a result, the user receives a list of EC numbers which are directly connected to the enzyme information of BRENDA. It is also possible to search via the BRENDA “Source Tissue” search form (“Classic View”). The result page displays all enzymes which are isolated or detected in the searched tissue term, directly linked to BTO. BTO and BRENDA are freely accessible for academic users. It can be freely downloaded via the “Ontology Explorer” of the BRENDA website or in the OBO format from “Obofoundry”. BTO (BRENDA Tissue Ontology) BRENDA Ontology Explorer BRENDA-website ExplorEnz – Enzyme Nomenclature Obofoundry Gene Ontology Consortium EBI-EMBL Bioportal des National Center for Biomedical Ontology, Stanford, USA
China is the main supplier of wolfberry products globally, with 2023 production derived from a cultivation area of 325,000 mu – about 21,667 ha (53,540 acres) – creating a national wolfberry economy of 29 billion yuan (approximately US $4.2 billion). Some 61% of commercially produced wolfberries in China comes from L. barbarum plantations in the Ningxia region, mainly in Zhongning County. Goji cultivation also occurs in Gansu, Qinghai Province, and the Haixi Mongol and Tibetan Autonomous Prefecture. The main berry products for export are manufactured beverages, juice concentrate, dried berries, snacks, and freeze-dried juice powder and berries. Ningxia goji has been cultivated along the fertile floodplains of the Yellow River over centuries. The region has developed an industrial association of growers, processors, marketers, and scholars of wolfberry cultivation to promote the berry's commercial and export potential. Ningxia goji berries, the variety used by practitioners of traditional Chinese medicine, are celebrated annually with a festival.
The phosphatases in the PHLPP family, PHLPP1 and PHLPP2 have been shown to directly dephosphorylate, and therefore inactivate, distinct Akt isoforms, at one of the two critical phosphorylation sites required for activation: Serine473. PHLPP2 dephosphorylates AKT1 and AKT3, whereas PHLPP1 is specific for AKT2 and AKT3. Lack of PHLPP appears to have effects on growth factor-induced Akt phosphorylation. When both PHLPP1 and PHLPP2 are knocked down using siRNA and cells are stimulated using epidermal growth factor, peak Akt phosphorylation at both Serine473 and Threonine308 (the other site required for full Akt activation) is increased dramatically.
Sources: en.wikipedia.org
Different isoforms of actin are present in the cell nucleus. The level of actin isoforms may change in response to stimulation of cell growth or arrest of proliferation and transcriptional activity. Research on nuclear actin is focused on isoform beta. However the use of antibodies directed against different actin isoforms allows identifying not only the cytoplasmic beta in the cell nucleus, but also alpha- and gamma-actin in certain cell types. The presence of different isoforms of actin may have a significant effect on its function in nuclear processes, as the level of individual isoforms can be controlled independently. Functions of actin in the nucleus are associated with its ability to polymerize and interact with various ABPs and with structural elements of the nucleus. Nuclear actin is involved in:
A/B tests are sensitive to variance; they require a large sample size in order to reduce standard error and produce a statistically significant result. In applications in which active users are abundant, such as with popular online social-media platforms, obtaining a large sample size is trivial. In other cases, large sample sizes are obtained by increasing the experiment enrollment period. However, using a technique coined by Microsoft as Controlled Experiment Using Pre-Experiment Data (CUPED), variance from before the experiment start can be taken into account so that fewer samples are required to produce a statistically significant result. Because of its nature as an experiment, running an A/B test introduces the risk of wasted time and resources if the test produces unwanted or unhelpful results. In December 2018, representatives with experience in large-scale A/B testing from 13 organizations (Airbnb, Amazon, Booking.com, Facebook, Google, LinkedIn, Lyft, Microsoft, Netflix, Twitter, Uber and Stanford University) summarized the top challenges in a paper. The challenges were grouped into four areas: analysis, engineering and culture, deviations from traditional A/B tests and data quality.
Alfred Ellis Wilhelmi (1910–1994) was an American endocrinologist recognized for contributing to the understanding of anterior pituitary hormones. Born in Lakewood, Ohio, Wilhelmi attended Cleveland public schools. Wilhelmi earned a B.S. degree in premedical sciences from Western Reserve University in 1933. He then attended Oxford University as a Rhodes Scholar, where he obtained a B.A. in 1933 and Ph.D. in animal physiology in 1937. He then joined Yale University's Biochemistry Department, rising to the position of Professor in 1950. Wilhelmi chaired the Department of Biochemistry at Emory University School of Medicine from 1950 to 1977. In 1960, he was named Charles Howard Candler Professor of Biochemistry. In 1979, he received Emory's Thomas Jefferson award for service to the university and community. Wilhelmi also was President of the Endocrine Society from 1968 to 1969. During his career, he published over 80 articles in scientific journals.
Accumulation of amyloid proteins in the gastrointestinal system may be caused by a wide range of amyloid disorders and have different presentations depending on the degree of organ involvement. Potential symptoms include weight loss, diarrhea, abdominal pain, heartburn (gastrointestinal reflux), and GI bleeding. Amyloidosis may also affect accessory digestive organs including the liver, and may present with jaundice, fatty stool, anorexia, fluid buildup in the abdomen, and spleen enlargement. Accumulation of amyloid proteins in the liver can lead to elevations in serum aminotransferases and alkaline phosphatase, two biomarkers of liver injury, which is seen in about one third of people. Liver enlargement is common. In contrast, spleen enlargement is rare, occurring in 5% of people. Splenic dysfunction, leading to the presence of Howell-Jolly bodies on blood smear, occurs in 24% of people with amyloidosis. Malabsorption is seen in 8.5% of AL amyloidosis and 2.4% of AA amyloidosis. One suggested mechanism for the observed malabsorption is that amyloid deposits in the tips of intestinal villi (fingerlike projections that increase the intestinal area available for absorption of food), begin to erode the functionality of the villi, presenting a sprue-like picture.
Tranexamic acid is a medication used to treat or prevent excessive blood loss from major trauma, postpartum bleeding, surgery, tooth removal, nosebleeds, and heavy menstruation. It is also used for hereditary angioedema. It is taken either by mouth, injection into a vein, or by intramuscular injection. Tranexamic acid is a synthetic analog of the amino acid lysine. It serves as an antifibrinolytic by reversibly binding four to five lysine receptor sites on plasminogen. This decreases the conversion of plasminogen to plasmin, preventing fibrin degradation and preserving the framework of fibrin's matrix structure. Tranexamic acid has roughly eight times the antifibrinolytic activity of an older analogue, ε-aminocaproic acid. Tranexamic acid also directly inhibits the activity of plasmin with weak potency (IC50 = 87 mM), and it can block the active-site of urokinase plasminogen activator (uPA) with high specificity (Ki = 2 mM), one of the highest among all the serine proteases. Side effects are rare; they include changes in color vision, seizures, blood clots, and allergic reactions. Tranexamic acid appears to be safe for use during pregnancy and breastfeeding. Tranexamic acid was first made in 1962 by Japanese researchers Shosuke and Utako Okamoto. It is on the World Health Organization's List of Essential Medicines. Tranexamic acid is available as a generic drug.
Sources: en.wikipedia.org
Residual moisture can influence chemical degradation, cake collapse, and long-term stability. Low moisture levels usually improve stability, but each product has an optimal range.
Most lyophilized products are stored upright at controlled temperatures, often refrigerated or frozen. Protection from moisture and light helps maintain the dried cake.
A diluent is added to the dried cake, which dissolves to form a solution or suspension. Gentle mixing avoids foaming and preserves sensitive molecules.
Simple drying usually removes water by evaporation from a liquid or solid, often with heat. Lyophilization first freezes the material and then removes ice by sublimation under vacuum. This avoids prolonged exposure to liquid water and high temperatures.